Black EPDM Rubber Waterproofing Membrane

Waterproofing Membrane 1.1x10m/roll;1x20m/roll 2.1.2/1.5mm available 3.Ageing resistance, long service life

 

 

Black EPDM Rubber Waterproofing Membrane

 

Features

 

Good ability of anti-aging, resistant to high and low temperature. High tensile strength and enlongation, which adapts to the contraction or crack of the base.

 

 

 

Technical Index(Executive standard: GB18173.1-2006)

 

 

 

No.	Item		Technical index
			JL1	JF1
1	Tensile strength at break Mpa	Normal temperature≥	7.5	4.0
		60°C≥	2.3	0.8
2	Elogation at break	Normal temperature≥	450	400
		-20°C≥	200	200
3	Tearing strength KN/m≥		25	18
4	Impermeability 30minutes No leak		0.3Mpa	0.3Mpa
5	Low temperature flexibility °C≤		-40	-30
6	Heat air ageing 80°C x 168h	Tensile strength retention rate % ≥	80	90
		Elogation retention rate % ≥	70	70
		Apperance of 100% elogation	no crack	no crack

 

Where to use

1.Basement, lavatory and roofing of key waterproof engineering, general and civil engineering.

2.Bridge, road, granary, tunnel, park, pool and others.

 

Application:

 

1. Make sure the base surface smooth, clean and dry(Moisture<9%), then paint the delicated agent on the base surface. Start application till it is dry.

 

2. Reinforce the parts which are easy to leak, such as seam, hole, channel, wall, pipe and corner.3. Application Method:

 

Lay the membrane directly. Be careful to control the overlaps of the long side and short side.

 

4. After application, a careful inspection is required. Make sure there is no air bubble, no fold, no falling away etc to guarantee the waterproof life.

 

  

Product Pictures

 

        

Black EPDM Rubber Waterproofing Membrane